GRAPHTEC midi LOGGER GL200

Item		GL200
Number of analog input		10 channels
Input Method		Photo MOS relay scanning system; all channels isolated
Measurement Ranges	Voltage	20, 50, 100 500mV; 1, 2, 5, 10, 20, 50V ; 1-5 v F.S.
	Temperature	Thermocouples: K, J, E, T, R, S, B, N, W(WRe5-26)
	Humidity	0 to 100% (Voltage 0V to 1V scaling conversion)
Filter		Off, 2,5,10,20,40 Filter operation is on a moving average basis. The average value of the set sampling count is used.
Scan Speed		0.1s/10 Ch Maximum
Trigger Functions	Repeat Trigger	Off, On
	Trigger Types	Start/Stop: Data capture starts/stops when a trigger is generated.
	Trigger Conditions	•Start: Off, Level, External digital, Date •Stop: Off, Level, External digital, Date,Time
	Alarm Judgement modes	• Analog: H, L, Window In, Window Out • Logic: H,L •Pulse: H, L, Window In, Window Out
Alarm output	Output format	Open Collector output (100 k Ohm pull-up resistance)
	Output Conditions	Level judgement, window judgement, logic pattern judgement, pulse judgement
Pulse/Logic Input		Pulse input: 1ch/ Logic input:1ch
Pulse input	Revollutions mode	Spans 50, 500, 5000, 50k, 500k, 5M, 50M 500M RPM
	Counts Mode	Spans 50, 500, 5000, 50k, 500k, 5M, 50M 500M Counts/sec
	Inst. Mode	Spans 50, 500, 5000, 50k, 500k, 5M, 50M 500M Counts/ec
	Max number of pulse inputs	Counts, Inst modes: 50k/sampling interval • Revs 50k/s
PC interface		USB (Ver.1.1)
Internal memory devices	Memory capacity	• Internal memory: 3.5MB • USB memory: Depends on the type of memory used
	Memory contents	• Setup conditions • Measured data • Screen copy
Statistical calculation	Types of operation	Avarage value, peak value, maximum value, minimum value, RMS
	Number of operations	2 can be set simultaneously
	Method	Realtime operation Note: When the Digital screen + Calculation Display screen has been specified, the calculation results are displayed.
Search functions		Search the captured data for the required number of points
Scaling function		4 points can be set for each channel
Display	Size	3.5'' TFT colour LCD (320 x 240 dots)
Display screen	Waveform display	Waveform screen + digital screen, Waveform screen
	Digital display	Waveform screen + digital screen, digital screen + Calculation Display screen
A/D Converter		16bits(out of which 14 are internally acknowledged)
Maximum permissible input voltage		Between +/- terminals: 60Vp-p •Between inut terminals and casing: 60Vp-p
Input Impedance		1M Ohm ±5%
Withstand Voltage		Between each input channel and main unit chassis, and also between each CHs: 1minute at 350V p-p
Operating Enviroment		0 to 40°C, 30 to 80% RH
Power Supply	AC adapter	100 to 240 VAC, 50/60 Hz
	DC input	8.5 to 24 VDC)
	Battery pack(optional)	7.4VDC (2200mAh)
Power consumption		28 VA or lower (AC drive)
External Dimensions		194 x 122 x 41 mm
Weight		480g (excluding the AC adapter and battery)